Philips Respironics BiPAP S/T, C Series & SD Card

BiPAP S/T
Noninvasive home ventilator
Philips Respironics, a pioneer in noninvasive ventilation (NIV) and a global leader in the respiratory medical device market, introduces the next generation BiPAP S/T ventilatory support system.

 

TECHNOLOGY

By combining Respironics' proven bi-level technology with a new, improved platform, the NIV system rated "Best Brand"* by homecare providers just got better for clinicians and patients. The new BiPAP S/T homecare ventilator is cleared for use with patients as young as seven years of age and who weigh more than 40 pounds.

Digital Auto–Trak detects the onset of inspiration and exhalation and has the ability to recognize and compensate for leaks, both intentional and unintentional. Automatic triggering and cycling means no adjustments are required for optimal sensitivity.
EncorePro and EncoreAnywhere provide clinicians with easy access to BiPAP S/T ventilator data via wired and wireless connectivity options along with SD card option. This gives you the ability to monitor patient compliance, evaluate ventilation efficiency, and identify trends.
Improved humidification- System One Humidity Control analyzes ambient temperature, relative humidity and patient flow to deliver optimum humidity — and ultimate comfort — to the patient while also dramatically reducing rainout.

 

Performance:

• Operation Modes: CPAP, S, and ST.
• Bi-Flex: Available on S mode.
• Timed Inspiration: 0.5 to 3.0 seconds.
• IPAP Pressure range: 4 to 25 cm H₂0.
• EPAP Pressure Range:  4 to 25 cm H₂0.
• CPAP Pressure Range:  4 to 20 cm H₂0.
• Ramp: 0 to 45 minutes.
• Breath Rate: 0 to 30 BPM.
• Data Storage Capacity: with SmartCard 9 months at 3 usage sessions per day.
• Data Storage Content: with SmartCard, date/time, hours of use, usage patterns, FOSQ, Compliance Monitoring,
• Breathing Detection.
• Automatic Altitude Compensation.
• Mask off alert.
• Auto on/off.
• Maximum flow: <35 lpm.
• Maximum sound level: <30 dba at 10 cm H₂0.

Patient Alarms:

• Patient disconnect, Apnea and Low Minute Ventilation.

Physical Characteristics:

• Size: 4.0 H x 5.5 W x 7.0 L inches (10.2 x 14.0 x 17.8 cm).
• Weight: 3.0 lb (1.36 kg).

Power Characteristics:

• Power supply: Input range 100 - 240V, 50 - 60 Hz.
• Power consumption: 125 W.
• Battery: 12 VDC.  

Environmental Requirements:

• Operating Temperature: +41°F to +95°F (+5°C to +40°C) .
• Operating Altitude: 0 to 7,500 ft (o to 2,286 m).
• Operating Humidity: Between 15% and 95% noncondensing. 

Includes:
System One BiPAP S/T C Series, SD Card, 6' - 22mm Hose, Power supply with 3' cable, AC Power cord (3'), 2 Reusable Air Filters and 1 Disposable Ultra-Fine Air Filter, Carrying Bag, and Patient Manual.