The ResMed Air 10 Oximetry Module is an equipment that is known to connect your Xpod Oximeter to the therapy machine. This easy to use oximetry module attaches directly to the module and then can be connected to the oximeter by inserting it into the adapter port. Please note that the machine is switched off before installing this module. The oximetry module, sensor and oximeter work together to save and record the oxygen saturation levels which in turn improves the users’ therapy experience.
The Air 10 Oximetry module is compatible with all the machines from the AirCurve 10 Series and AirSense 10 Series. It is also designed to work with NONIN Xpod Oximeterand finger sensor device. It is recommended that the oximeter module should be cleaned occasionally to ensure the highest levels of hygiene. Cleaning the module is as easy as wiping it with a clean, dry cloth.
Key Features:
- Stores Oxygen saturation data on the SD card
- Easily connects to the Xpod oximeter via adapter port
- Compatible with AirCurve 10 Series and AirSense 10 Series
- Works with NONIN Xpod oximeter
- Simple to install and maintain
Operating temperature: +41°F to +95°F (+5°C to +35°C)
Operating humidity: 10 to 95% non-condensing
Operating altitude: Refer to your device User Guide for details
Storage and transport temperature: -4°F to 140°F (-20°C to +60°C)
Storage and transport humidity:
- Air10 5 to 95% non-condensing
- S9 10 to 95% non-condensing
Design life:
- Air10 1825 connections
- S9 1825 connections
Gross dimensions:
- Air10 (W x D x H) 2.1” x 1.2” x 2.0” (54 mm x 30 mm x 51 mm)
- S9 (L x W x H) 1.74” x 2.12” x 0.91” (44.35 mm x 54.10 mm x 23.30 mm)
Weight:
- Air10 0.95 oz (27 g)
- S9 0.77 oz (22.1 g)
