The AirCurve 10 S/T VPAP Machine with the HumidAir System is an advanced VPAP device which possesses a total of five operational modes and a plethora of advanced functions and eye-catching features. The ResMed VPAP ST is capable of monitoring your breathing rate and adjusting pressure depending on your inhalation and exhalation needs. This machine is stocked with special iVAPS technology, expiratory pressure relief (EPR), automatic start and stop functions, Vsync automatic leak management, ramp function, mask fitting function. With this AirCurve 10 it will permit sleep apnea patients to receive adequate therapy without having to bear with significant levels of discomfort.
Power supply: 90W
Typical power consumption: 53W (57VA)
Peak power: 104W (108VA)
Operating temperature range: +41°F to +95°F (+5°C to +35°C)
Operating humidity range: 10 to 95% relative humidity (non-condensing)
Operating altitude: Sea level to 8,500' (2,591 m) / air pressure range 1013 hPa to
738 hPa
Storage & transport temperature: -4°F to +140°F (-20°C to +60°C)
Storage & transport humidity: 5 to 95% relative humidity, non-condensing
Pressure sensor: Internally located at device outlet, analog gauge pressure
type, -5 to +45 cm H2O
Flow sensor: Internally located at device inlet, digital mass flow type, -70
to +180 L/min
Sound Levels:
-SlimLine: 26.6 dBA with uncertainty of 2 dBA
-Standard: 26.6 dBA with uncertainty of 2 dBA
Power level:
-SlimLine: 34.6 dBA with uncertainty of 2 dBA
-Standard: 34.6 dBA with uncertainty of 2 dBA
Device Dimensions (H x W x D): 4.57" x 10.04" x 5.91"
(116 mm x 255 mm x 150 mm)
