You have no items in your shopping cart.
Be the first to review this product
Hybernite Rainout Control System WITHOUT Power Supply
Email to a Friend
The Plastiflex Hybernite Rainout control system is a sophisticated method to enhance your CPAP therapy as it controls and prevents the condensation sessions and rainout that most of the CPAP masks cause. Due to Hybernite Rainout Control System, patients experience a truly comfortable and hassle-free apnea therapy. It is a medical grade power supply and thus is safe to use at a home-setting or clinics. Hybernite works by maintaining a uniform temperature throughout the entire length of the breathing tube. Users just need to plug and power the system’s power supply to heat the copper wires that are embedded in the walls of Hybernite Heated Tubing.
The good news is that Hybernite allows you to sleep sound by optimizing the humidification so that users experience anundisrupted sleep. It does not even require any complex setting as the device connects to the Hybernite PSU with an easy plug-n-play connector. The main objective while designing the Hybernite Rainout Control System was to provide utmost comfort by delivering heated humidified air to the patients whether they are undergoing a ventilation therapy or sleep therapy. It solves the much irritating rainout problems as a result of high humidification. In the past, CPAP users had to lower their humidity levels to reduce the noise levels and chances of rainout. This rainout control system works only with CPAP/BiPAP machines that are equipped with water based humidifiers.
Heated Tubing Length: 1.83 Meters (6-feet)
Flow resistance: 60 l∙min-1 ≤ 0.1 kPa
Internal Diameter: 19 mm
Tubing Compliance Standards: ISO 5367:2000
Tubing Warranty: 30-Days
Tubing Replacement Schedule: Recommended every 6-Months
Supply Voltage and current to tube: 12 Volt; 2.0 A
Supply Voltage to power supply: 110V - 220V
Supply Frequency: 50-60 Hz
Use spaces to separate tags. Use single quotes (') for phrases.