The Pro REMStar 60 Series is the next generation in the line of “Pro” CPAP machines by Philips Respironics. Apart from the other features of earlier editions of this line of products, the 60 series offers a new level of therapy comfort with the Optional System One 60 series Heated Humidifier with Heated tube for 60 Series machines. The machine combines the proven comfort of C-Flex Plus pressure relief found in the REMStar Pro CPAP machine with C-Flex Plus PR System One, the Auto-Trial and CPAP-check modes of REMStar Pro CPAP with AutoIQ and humidification from System One 60 Series Heated Tube Humidifier with Heated Tube.
- Smart Technology Modes
- On Screen Data Display
- System One Resistance Control
- C-Flex Plus Pressure Relief
- System One 60 Series Heated Tube Humidifier with Heated Tube - Optional
Smart Technological Assembly
The REMStar 60 Series has the smart technology of CPAP-check mode and Auto-Trial mode that offers up to 30 nights of auto adjusting capability. The system functions as an Auto CPAP during the period of use delivering an adaptive pressure on a breath by breath basis. The machine functions as a CPAP delivering the pressure that the patient was at or below 90% of the time when the Auto-Trial mode is on.
To verify pressure requirements continuously, the CPAP-check mode makes adjustments after every 30 hours of use providing the user with more effective pressure levels over time. Although the entire available 30 nights of Auto-Trial do not need to be used continuously, an Auto-Trial mode must be a minimum of 3 nights in length.
On Screen Data
Users of the 60 Series Pro can see the sleep data on the display screen. Apart from that the leak rate, Apnea/Hypopnea Index as well as the 7 and 30 day average pressure readings are also available.
System One Resistance Control developed by Philips Respironics allows their machines to reach optimal pressure by using a numbering system that allows the CPAP device to recognize a mask that is used with treatment. It instructs the device to compensate for the specific mask type for achieving reliability and accuracy.
C-Flex Plus Pressure Relief
It is a step further than the C-Flex technology, which is a prominent feature in all the Respironics CPAP machines. The C-Flex Plus offers a smooth transition between inhalation and exhalation.
Optional System One 60 Series Heated Tube Humidifier with Heated Tube
Philips Respironics has aimed at maximizing comfort while managing rainout and potential water damage by adding the Heated Tube option to their breakthrough System One Humidity System. The humidifier adjusts the level of humidity by analyzing the ambient room temperature and machine airflow. The heated tube is only 15mm and maintains the desired temperature evenly from the machine to the mask.
There are three levels of humidity – 70, 80, or 90 percent which can be selected from the on-screen menu. If you are worried about water damage to your CPAP, the REMStar 60 Series has the System One Dry Box technology that reduces the damage. Its unique design features prevent water from entering the machine and a center air outlet port uses a one way valve. If water were to escape the chamber it is trapped by the Dry Box.
Pressure Range: 4-20 cm H20 (.5 increments)
Ramp Time: 0 to 45 min. (5-min. increments)
Starting Ramp Pressure: 4 to CPAP; user adjustable
Dimensions - Machine Alone: 7 in L x 5.5 in W x 4 in H (18 cm L x 14 cm W x 10 cm H)
Dimensions - Machine with Heated Tube Humidifier: 10.75 in L x 6.5 in W x 4 in H (27 cm L x 16.5 cm W x 10 cm H)
Weight - Machine Alone: 3 lbs / 1.36kg
Dimensions of 60 Watt Power Supply (For Use Without Heated Tube) - Not Including Cord or Plug: 4.75 in x 2.75 in x 1.75 in
Weight of 60 Watt Power Supply - Not Including Cord: 14.72 oz (0.92 lbs)
Dimensions of 80 Watt Power Supply (For Use With Heated Tube) - Not Including Cord or Plug: 6 in x 2.75 in x 1.75 in
Weight of 80 Watt Power Supply (For Use With Heated Tube) - Not Including Cord: 1 lb 3.04 oz
AC Power Consumption (with 60 W power supply): 100 - 240 VAC, 50/60 Hz, 2.1 A max.
AC Power Consumption (with 80 W power supply): 100 - 240 VAC, 50/60 Hz, 2.0 A max.
DC Power Consumption: 12 VDC, 6.67 A
Altitude Compensation Automatic - Maximum height 7500 feet.
Filters Pollen and optional ultra-fine
Device Set-Up LCD/Control Wheel or Encore Software
- Display: Compliance VIC. 7-Day and 30-Day averages
- SD Card>1 Year Compliance Data
- On-board: up to 6 months
Compliance Meter: Breathing detection
Electrical Requirements 100 - 240 VAC, 50/60 Hz 12volt DC
European Voltage Usage: Yes, outlet adapters required
Max Exposure Heat for Machine: Machine should not be exposed to heat greater than 140 degrees Fahrenheit
Sound Level - Mask Leak Alert: 35 dB, +/- 2 dB
Required Settings: 1 Pressure Setting is Required
Unless directed otherwise, CPAP.com will leave this machine at its default settings of:
Ramp Time: 5 Minutes
Ramp Start: 4 cm H2O
Auto On: On
Auto Off: Off
- 1 x System One REMStar 60 Series Pro CPAP
- 1 x System One REMStar 60 Series Power Supply and Cord
- 1 x Carrying Case
- 1 x Hose
- 1 x Patient Manual
- 1 x SD card
- 1 x Quick set-up guide
- 1 x Reusable Foam filter
Use spaces to separate tags. Use single quotes (') for phrases.