You have no items in your shopping cart.
Be the first to review this product
Salter Labs PRO2 Check Elite Multifunction Oxygen Concentrator Indicator
Email to a Friend
The Salter Labs Pro2 Check Elite multifunction oxygen concentrator indicator is an amazing addition to the kit for care providers or repair technicians who work with oxygen concentrators. It is a small, lightweight, battery and compact device that measures three vital parameters of a concentrator’s function namely flow rate LPM, oxygen percentage, & pressure PSIG that required three different instruments and excess time in the past. Each of the test instruments required a defined set of test procedures and separate adapters/connectors to collect data. In case you are using an additional oxygen analyzer, you may have to replace the fuel cell on a regular basis. This type of analyzers demand regular recalibrations and may fluctuate with the temperature changes that would require dedicated time and attention to perform.
The Pro2 Elite uses a microprocessor with logic to detect the accurate values of flow in LPM, in PSIG, as well as the oxygen concentration and doesn’t require any additional repeated calibrations. For oxygen analysis, the Pro2 Check Elite uses ultrasound technology (technology that is also incorporated into the manufacture of many concentrator units) and is not affected by minor temperature or elevation changes. The microprocessor logic can be recalibrated within minutes with the help of only two buttons and a USP 99.9% oxygen source. Users can perform a verification check in 10 seconds with the help of one button and no additional test equipment is needed. Moreover, there is no fuel cell to replace as it operates on a standard 9-volt battery and shuts off automatically after 5 minutes. The device saves battery by utilizing a LCD liquid crystal display. It indicates a “LO BATT” on the display window when the device is getting out of battery. So, annually users may need one or possibly two 9-volt batteries depending on individual usage.
The PRO2 Check Elite Multifunction Oxygen Concentrator Indicator comes with a clear plastic carrying case that prevents the device from spilling. Its switches are designed in membrane style and have no sharp edges. The case comes with a handy belt clip and an adjustable carrying strap for the convenience of the user. With a pre-installed battery, this oxygen concentrator indicator can be readily used when taken out of the box.
Product Number: PRO2 Elite-1
Display Range: 20.9% - 100%
Accuracy: +/- 2%
Linearity: +/- 2% Full Scale
Response Time: 10 Seconds
Range: 0 - 25 PSIG (0 - 172 kPa)
Resolution: +/- 1% PSIG (0.1 - 99.9 kPa; 1.0 over 100 kPa)
Accuracy: +/- 1% of Full Scale
Range: 0 - 10 LPM
Accuracy: +/- 0.3 LPM
Resolution: 0.1 LPM
Height: 5.75 Inches
Width: 3.6 Inches
Depth: 1.29 Inches
Weight: 9 Ounces
Operating Temperature: 32 - 105 Degrees Fahrenheit
Case: ABS Plastic with Threaded Metal Bolt Channels
Warranty: 2 Years
Use spaces to separate tags. Use single quotes (') for phrases.