Gross Particle Filters (Flow Setting 1-4) for Inogen One G3
Inogen One G3 Gross Particle Filters (Flow Setting 1-4), 2/Pack
Replacement eco-friendly particle filters keep dust, pet hair, and other air-borne contaminants away from your oxygen.
The removable particle filters cover the air intake screens to filter out dust, pet hair, and other air-borne contaminants. They are washable and reusable, making them one of the eco-friendly features of Inogen concentrators. Users should wash and dry the filters weekly (more often in very dusty environments) to help keep the concentrator working properly.
The Inogen One G3 Gross Particle Filter with Flow Settings from 1-4 can easily be placed into the G3 and should be replaced every 6 months. To guarantee accurate air flow they should cleaned at least once every few weeks. They can be cleaned with warm water and soap. Always completely dry the G3 filters before reusing them. This package includes 2 square mesh filters.
Compatibility: There are two different particle filter sizes available for InogenOne G3 POCs. Older InogenOne G3 devices, with flow settings from 1-4, use smaller filters that measure approximately 1.0 x 1.5 inches (Part RP-300). Particle filters are NOT interchangeable.
Usage: The particle filter should be cleaned at least once a week (or whenever dirty) to ensure the ease of air flow. Clean the particle filter with a mild liquid detergent (such as Dawn and water); rinse in water and allow to air dry completely before reuse.
Inogen recommends replacing the filter when it become misshapen or when the screen is damaged.
The G3 comes in two size capacities, with a Flow Setting 1-4 and 1-5. The replacement filters are not interchangeable between the two capacities. Be sure to order the filters intended for your Flow Setting range.